Thermo 410iQ ambient Carbon Dioxide analyser
Ambient CO2 analyser
The Thermo Scientific™ 410iQ Carbon Dioxide (CO2) Analyzer utilizes advanced Non-Dispersive Infrared (NDIR) optical filter technology to measure concentrations of CO2.
| Gases Measured | Carbon Dioxide |
| Description | 410iQ Carbon Dioxide Gas Analyzer |
| Flow Rate | Flow Rate 1.0 SLPM (1 atm inlet pressure) |
| Height (Metric) | 221.48mm |
| Depth (Metric) | 609mm |
| Linearity | ±1.5% of span (at concentrations of 10 to 100% of span) |
| Approvals and Certifications | CE, TUV-SUD Safety |
| Response Time | 90 seconds (30 second averaging time) |
| Span Drift | ±2% of reading (24 hour) |
| Temperature (Metric) Operating | 5–45 °C (may be safely operated over the range of 0–45 °C) |
| Weight (Metric) | 14.2kg (standard), 13.7 (high level) |
| Width (Metric) | 425.45mm |
| Zero Drift | ±1.0 ppm (24 hour) |
| Zero Noise | 0.5 ppm RMS (60 second averaging time) |
| Measurement Range | 0—10000 ppm |
| Analog Inputs | 4 Isolated voltage inputs 0–10 V |
| Analog Output | 6 Isolated analog voltages outputs, with 4 selectable ranges 6 Isolated analog current outputs, with 2 selectable ranges |
| Communication Ports | Serial ports: 1 RS-232/485 port; 1 RS-485 external accessory port Other ports: 3 Full Speed USB ports (one in front, two in rear) 1 Gigabit ethernet port |
| Communication Protocols | MODBUS, Streaming, AK, Gesytec (Bayern-Hessen) |
| Detection Limit | 1.0 ppm (60 second averaging time) |
| Digital Inputs | 16 Digital inputs (TTL) |
| Digital Outputs | 8 Solenoid driver outputs 10 Digital reed relay contact outputs |
| Power Requirements | 100-240 VAC 50/60 Hz, 275 Watts |
