Thermo 48iQ ambient CO analyser | EMS
Thermo 48iQ ambient CO analyser

Ambient CO analyser

The Thermo Scientific™ 48iQ Carbon Monoxide (CO) Analyzer utilizes gas filter correlation technology to measure the amount of carbon monoxide in the air.
Gases MeasuredCarbon Monoxide
Description48iQ Carbon Monoxide Analyzer
Flow Rate1.0 SLPM (1 atm inlet pressure)
Height (Metric)221.48mm
Depth (Metric) 609mm
Linearity±1% full scale < 1000 ppm; ±2.5% full scale > 1000 ppm
Lower Detectable Limit0.04ppm (30 second averaging time)
Approvals and CertificationsCE, TUV-SUD Safety, RFCA-0981-054
Response Time60 seconds (30 second averaging time)
Span Drift ±0.5% reading (24 hour)
Temperature (Metric) Operating5–45 °C (may be safely operated over the range of 0–45 °C)
Weight (Metric)15.6kg
Width (Metric)425mm
Zero Drift<0.1 ppm (24 hour)
Zero Noise0.02 ppm RMS (30 second averaging time)
Measurement Range0-10000 (ppm or mg/m3)
Analog Inputs 4 Isolated voltage inputs 0–10 V
Analog Output6 Isolated analog voltages outputs, with 4 selectable ranges 6 Isolated analog current outputs, with 2 selectable ranges
Communication PortsSerial Ports: 1 RS-232/485 port 1 RS-485 external accessory port Other Ports: 3 Full speed USB ports (one in front, two in rear) 1 Gigabit ethernet port
Communication ProtocolsMODBUS, streaming
Detection Limit0.04 ppm (30 second averaging time)
Digital Inputs16 Digital inputs (TTL)
Digital Outputs10 Digital reed relay contact outputs 8 Solenoid driver outputs
Power Requirements100–240 VAC 50/60 Hz 275 Watts

20 The Boulevard

Grange Rath


Co Meath, A92 RY72



Newsletter Signup


Subscribe for all of our latest EMS news and updates.