Flowsic 100 | EMS
Flowsic 100

In-situ flow monitor for gas emissions

The product family FLOWSIC100 was designed for emission monitoring tasks. The "H" versions are suitable for stacks with large diameters and applications with high dust content. The "M" versions are especially suited for stacks with medium diameter. The ultrasonic transducers of the "PR" probe type are mounted with fixed path length on one sender/receiver unit (measuring probe). The "AC" versions have an innovative internal cooling and are suitable for gas temperatures up to 450 °C. The purged "Px" versions are used for gases with high concentrations of sticky or wet dust. Rugged titanium transducers are standard and suitable under difficult conditions. The measuring system consists of 2 sender/receiver units or a measuring probe and a MCU control unit. The MCU is used for input and output of signals, for calculation of volume flow to reference conditions (standardization) as well as user-friendly LCD interface.
Measured valuesVolumetric flow, a. c., volumetric flow s. c., gas velocity, sound velocity, gas temperature
Gas temperature–40 °C ... +450 °C
Operating pressure–100 hPa ... 100 hPa
Nominal pipe size0.15 m ... 13 m Depending on device version
Conformities2001/80/EC (13. BImSchV) 2000/76/EC (17. BImSchV) 27.BImSchV 30. BImSchV TA-Luft (Prevention of Air Pollution) EN 15267 EN 14181 EN 16911-2 MCERTS GOST
Enclosure ratingIP65

20 The Boulevard

Grange Rath


Co Meath, A92 RY72



Newsletter Signup


Subscribe for all of our latest EMS news and updates.